bbshd

just built a ebike bbshd with a ASI bac 855 controller on a GIANT ANTHEM 4.0 goes really well FROM COLCHESTER UK

Purchased this for a project at the height of covid but never got around to building it. All parts are new, never used. Spent $805 at the time so putting up for 25% off retail. Buyer pays shipping or local pickup from San Francisco. Features from the original receipt BBSHD Hot Rod Program (For...

I have a Bafang BBSHD. My original 48v 16a battery died. I was told I could use a 52v battery and I could ignore the 07 error. When connected the display shows 07 error, which is an overvoltage error, but the motor does not power up. Is there anything I can do other than get a 48v battery?

Hi all, first post and new here, so be kind please if I'm found to be blatantly ignorant. I have a 2010 cube attention hardtail bike that I'm looking at converting to a daily commuter with a bbshd. My commute is 25k each way and I'd LOVE to be able to do it every day on a bike. Does anyone...

Has anybody had limited programming experience with the new Bafang BBS03

I bought a new cable and downloaded the link to the programming tool. It shows the com port but when I click connect nothing happens, it does not recognize my controller. I've uninstalled the program several times no luck, running windows 10 and recognizes the usb-serial CH340 in device manager...

Hi Everyone I have recently installed the BBSHD on my Specialized Rockhopper MTB. It works great, plenty powerful (almost too powerful) but I do have a question that hopefully someone can comment on. Riding on rough mountain bike trails requires a pretty strong bottom bracket - Does anyone...

Hello, I'm new to the ebike world. Can someone help me w/ bafaang bbshd. Gear Shifter sensor wire from controller, got pinched in bottom bracket mount, melted and shorted out. I tried to reconnect the wires but not even the display powers on anymore.

I built this super nice hybrid commuter ebike last month. I absolutely love it, but honestly I rarely ride it as I prefer my custom electric longboards. I would rather sell this for the cost of the parts ($2,650) so someone else can enjoy it more. I am a professional electric vehicle...

I have been using the Speed android app to change a setting here or there on my bbshd. Never had a single problem connecting or programming anything. A week ago I made a post on the Bafang tips and tricks facebook group asking for advice on programming the bbshd. I mainly just wanted to extend...

I bought a BBSHD and a Giant Talon 2. Unfortunately, it does not fit. See: https://ebikesforum.com/threads/bbshd-not-fitting-on-giant-talon-2-2022.2433/ People have suggested grinding down the tube, but I have not ridden this bike more than about 20 yards and I would rather return it for...

I have a new Giant Talon 2 (2022) and a BBSHD motor. I have seen many posts of people putting this motor on the Talon 2 (though pre-2022) and other similar Talons. I am finding it is only fitting when hanging straight down. Am I missing something? The diagonal tube extends slightly past the...

Hi, even though the driver for the new USB programming cable from Bafang and the Luna Cycle programmer download was succesfull, there is no communication with the motor - connect botton clict and faded disconnect botton green - no controler infos shown - no error message. The USB interface...

Hi! I have a 100mm BBSHD motor and 52v 14Ah battery (35E cells) that i'd like to trade or sell, for what i want this is too big and won't fit the BB, the motor/battery have been used for 38 miles. Is there anyone in or near Austin that would like to trade for a BBS02 750w or buy what i have?

Hi guys, I've got a giant fathom 2 2019 and looking at the bbshd 1000w kit, however if I've measured correctly I believe my bikes bottom bracket is 79mm wide, do any of bafangs mid drive kits fit? Cheers

So I have a Tern Verge D9 that I've put a BBSHD on. Currently I have a 52T chainring on the front. The smallest rear cog is 11T but currently the bike gets max speed in a higher rear cog. Would I get any increase in max speed by going for a smaller front chain ring (say 44T or 46T) and utilising...

Bafang BBSHD 1000-watt motor What is the manufacture assist (current and speed limit) percentage for setting 1 through 9 the control is an 850c?

I have converted a Motobecane Fantom pro to electric using the Bafang BBSHD Middrive. I was hoping to use a set of Magura MT5E brakes with my Bafang BBSHD. The Maguras use a "higo" 2 pin keyed connector, and the Bafang BBSHD uses the "8fun" connector that is a 3 pin, and keyed so these cannot...

Greetings from Colorado So after 2 years of scouring the internet at full nerd I think I've become frustrated enough to design my own version of BBSHD controller for the STOCK HOUSING. As far as I can tell right now we are stuck with either adding extra boxes to our bike(BAC 500, Phaserunner)...

I’ve converted a few bikes to mid drive 750s/48 volts. I just got my hands on a 2019 Giant fathom for a steal. I want to throw a mid drive 1000watt on her. I’ve come across a few post’s where guys were having issues running these 1000w motors with 52 volt batteries. I believe it was some sort...