bbshd

My dream build would be the Honzo ESD with the BBSHD but before I pull the trigger on buying the frame (I plan to go 42t Bling Ring or an Eclipse ring with 8 or 9 speed cassette) , is there any issues you could see arising like intrusive chainstays? The frame bottom bracket is threaded 73mm and...

it seems simple, I swapped the mid drive over to a better spec bike after a year of use on my canndale, its worked great all that time, since i swapped over the error code 21 has come up with a engine symbol, the speedo doesn't work when i check the wheel sensor it flashes as it passes the...

I want a bbshd 1000w but in Canada ontario ottawa they asking that the power maximum is 500w so can i get a 1000w programmed to 500w ? And still be legal?

Hello! :) I am almost ready to buy ,i have the $$$ but i need to know if my CANONDALE CUJO XXL with a bottom bracket of 6.2cm / 2.4" will accept a bafang mid drive bbhsd? Thx and my best regards.

New bike. First time startup. Display worked, but Motor would not engage w/throttle or PAS, so I disconnected and tried to reconnect the cables. While the display (green) cable was disconnected, a spark was observed between 2 pins. Yikes! Something may have shorted. After reconnecting it, the...

I think my controller died. Any recommendations for Bafang repairs near the Santa Clarita Valley?

New to eBikesForum, I ride a Tour Easy recumbent with Bafang BBSHD conversion. I have had this combination for about 22 months, with 4900 miles.

Get error 07 if connect a 52 V battery fully charged. Tried copying profile using the programming cable from a Luna BBSHD and it did not fix it. Is it possible or do I need buy a new controller? BIG UPDATE - the answer to the title question is yes - found the answer under an Error 30...

The Mukluk has a 100mm BB so naturally I ordered the 100mm BBSHD version. However the chainstay interferes a bit with the secondary reduction gear housing so only about 12mm of thread is showing on the non-drive side. Only enough space for the mounting bracket and lock nut but not for the dust...

Just made this happen. It took me a few weeks because I started out a total Noob. Haven't used a bike in 15 years, so had to relearn everything. After buying a bike tool set, and getting the cranks off, it was fairly easy. I got the BBDHD 68-73 kit from Bafangdirect. Installed the motor and on...

I would like to mid drive my Giant Yukon fat tire bike with a BBSHD for sand dune riding. FWIW online I have learned that it is hard to get good chain lines (CL) with a BBSHD. The Yukons current CL is 16 mm outboard of the bottom bracket (BB) shell. The BBSHD is 34 mm from where it would make...

It seems Christini has finally put a Bafang mid-drive on their AWD fatty. This one has a hopped up and highly illegal BBSHD, but the bike is sold with either the BBS02 or the BBSHD:https://electricbike-blog.com/2018/0...ctric-fatbike/ More on the Christini system here: Christini All Wheel Drive...

Hi ebikers! I've hit the two hundred mile mark on my BBSHD mountain bike build. Loving every minute of it! I'm using the standard BBSHD chainring and but it drops occasionally even so my chain line is really straight. I have been looking at the Lekkie Bling Ring and can not decide between the...

I'm planning to install a BBSHD on a Specialized Stumpy with a 68mm bottom bracket as my second e-bike build. I saw another build thread where someone did exactly such a build using the standard 68-73mm BBSHD kit.

Bafang BBSHD Wiring Diagram by LunaCycle

Hi, So, how should I get into ebiking? Would it be best to convert my Giant ATX (size large) or buy a factory bike? In each case, what kit / what bike would I get? I have my eye on the TSDZ2, but it seems like the BBSHD is most popular. I know I definitely want a pedelec instead of an electric...

I am a good home bike mechanic but the BBSHD gray lock nut will just start to turn and then stops after about 1/8th of a rotation. Its acting as if the threads don't correspond to the motor spindle threads. It is NOT cross threaded. There are no visible defects to the nut or the spindle. The...

Hoping to set up a BBSHD as spending plan permits which appears as though will occur in two or three weeks as long as they are still in stock. Should I get the Gear Sensor? I know exactly what it does. Yet, I'm wondering if anyone else uses it...Well would you do it again or would you go...

Hi guys! I've been riding a Bafang BBsHD motor fixed to a Trek Merlin - entry level MTB frame for over a year. Now, as I realized that this bike is mostly used on pavement within city and there's a little bit of flex in the frame when riding fast/putting a lot of power, on top of that the frame...