Just got my new Keteles K800 Dual Motor E-bike - Yolin Display Codes?

H

Hozer

Member
Local time
10:44 PM
Joined
Oct 11, 2023
Messages
68
Location
Oregon
Just got my new Keteles K800 Dual Motor E-bike, I have a Yolin Display. what do these mean and what they do. here is a list of the P codes:

P01=003
P02=000
P03=048
P04=010
P05=005
P06=29.0
P07=086
P08=100
P09=000
P10=002
P11=001
P12=005
P13=005
P14=012
P15=?
P16=002
P17 = 00
P18 =01

Thanks in advance
 
Thanks for the link but not sure what version of the Yolin display I have. I have seen some different versions of this display.
Example: Yolin YL81F

Wish I could figure out what version of the display I have.
 
Thanks. The Yolin YL81F, and the Yl91f-v look the same too me. They look like what I have but are the settings the same for each one?
 
fabbrisd said:
Looking to help if I can - what you mean is Keteles 800 came with a Keteles manual/put-together-guide and did NOT come with instructions for your display - right ?

CLICK HERE YOLIN YL81F MANUAL

CLICK HERE YOLIN YL91F MA
Click to expand...

Correct! did NOT come with instructions for your display! Here is my specs:

2000 Watts, ( Dual Motors 1000 watts each ), Controller 30 amps, Battery 48 Volts, 24ah. Thats's all I know for sure! Sucks donut lol
 
Update: I just found this but not sure for which display it is for???

P01=003 (back light level)
P02=000 (KMH or MPH)
P03=048 (voltage)
P04=010 (screen timeout 10 minutes)
P05=005 (first number = when the motor helps 0 or 1, 5 = levels)
P06=29.0 (tire size)
P07=086 (? Not sure)
P08=100 (speed limit in kmh)
P09=000 (0 motor helps immediately when you peddle)
P10=002 (0 is pedal assist only, no throttle, 1 is throttle only, 2 is both)
P11=001 (sensitivity of peddle assist 1-24, 1 is the highest)
P12=005 (intensity of power delivery 1-5, 1 is the most)
P13=005 (number of magnets on crank sensor 5,8 or 12)
P14=012 (max amp draw of controller)
P15=38.0 (under voltage cutoff, 38v vs. 48v)
P16=002 (reset ODO, hold mode button and ODO returns to 0)
P17 = 00 (cruise control)
P18 =01 (walk boost)
 
1. Download both Manuals - I skimmed over themand they seemed as straightforward as these type of manuals can be

2. Determine "which of the two" Displays you have

3. Correct manual for that display will guide you thru the "Settings Menu"

4. In the correct manual - check for "Unlock Code" if the Factory has set a Unlock Code for your Displa - if you change Unlock Code DO NOT LOSE YOUR CODE - also check for "Factory Reset" in case you get lost in your changes or make a boo-boo
 
Sometimes it's only the "Unlock Code" that changes with the different ebike brands..make sense?
 
I'm not trying to sideline anyones progress, but isn't the model & version # printed on the back of the displays? My new Yolin display does.
 
OK thanks I just look. It has two long numbers: Here they are

1. 81f48264418Y0204
2. 20230710H0244

Did a search could not find and info on those numbers!! s**t!!

Thanks for trying
 
@fabbrisd

I have no clue what model I have and version number. The Yolin YL81F, and the Yl91f-v look the same too me

Looks like It maybe the YL81F. The reason It maybe cuz of this number -> "81F"48264418Y0204
but not sure
 
Back
Top