Gen 3 Ebikes

[LastButNotLeast]

Wallke still sells the Wallke F2 fat tire bike. It uses the identical kingmeter-2 display that is on the Gen3 bikes. It’s not listed separately but they probably have one to sell. I think they were around $75. Call them and see. If they ask for a SN, send me a PM and I’ll give you the SN off my F1.
The reason the thumb throttle fails on these is that the Hall effect magnet that IS glued into the thumb throttle falls out. I had one warranty replaced on my Wallke F1.
As for the lock, just drill the tumbler section out. Wallke probably has a key and lock kit too.

48V Gen3 Electric Bike EBIKE LCD Display King Meter EBIKE LCD Display Digital II | eBay

Options: 48V. 1 x LCD Display. WILD APPLICATIONS: Wonderful accessories suitable for Gen electric bicycles, cars, scooters, motorcycles, mini bikes etc. Material: Plastic + LCD +Waterproof Cable Male Connector 6pins.

www.ebay.com

https://www.aliexpress.us/item/3256805792400723.html?spm=a2g0o.productlist.main.17.4916702ctEaNR2&algo_pvid=cf685f6c-4345-4f97-9248-995fecee69aa&algo_exp_id=cf685f6c-4345-4f97-9248-995fecee69aa-8&pdp_npi=4%40dis%21USD%2186.00%2179.12%21%21%2186.00%2179.12%21%402101f04d17132742949855313e39af%2112000035147268365%21sea%21US%210%21AB&curPageLogUid=rnB7KyHiSkuK&utparam-url=scene%3Asearch%7Cquery_from%3A

 

[hsdrggr]

Sorry, didn’t match mine. I have 016 and 019.
Try calling Wallke. Maybe they can get you a matching key.

 

[Carlosthetaxman]

Cool, about the magnet. I was trying to figure out how the sensor worked, or what was sending the signal. On the original, that was the only issue. BUT I still have the connectors to deal with either way.

And I'll check out the key code. I'm pretty sure there is one there.

Thanks for now!