For Sale: Li-Ion Battery Pack 48V 10.5Ah 500w output, Metal Enclosure, For E-Bikes, E-Sk8

80$ per battery w/ 15$ shipping (which covers up to 6 batteries; after 15$ to ship another bundle of up to 6)
Batteries may be purchased individually as well.

Condition: Discharged and Re-Charged less than 20 times. May have some scratches on the metal case that do not affect performance.
Weight: 6lb with metal enclosure, 5lb without
Measurements: Lenght: 18.5” (15.5 without case) Width: 3.25” (2.7” without case) Height: 1.7” (1.5” without case)
Casing: Metal
Nominal Voltage: 46.8V Limited Charging Voltage: 54.6V/3A Resistance (23 ± 2 ℃): ≤ 250mΩ Charging time: 4-5 hours Cycle life: ~800 cycles Nominal Capacity: 10.5Ah Watt Hours: 491.4Wh Minimum wattage output: 500w
Amount of cells: 39
Cell manufacturer: Panasonic-Sanyo Cell Size: 18650
Cell model: Panasonic-Sanyo NCR18650GA 3500mAh
13s bms BMS: Installed (Low Voltage, Overcharge, Temperature, Current output and Short Circuit protection, with power equalization output) Use the operating temperature: Discharge: (0,-60) ℃; Charging: (0,-45) ℃; Connectors are identical to the Bionix and Stromer bikes, so it may fit them. DOES'T COME WITH A CHARGER*
 

Attachments

  • battery photo 5.jpg
    battery photo 5.jpg
    114.6 KB · Views: 3,558
  • battery photo 4.jpg
    battery photo 4.jpg
    89.8 KB · Views: 402
  • battery photo 3.jpg
    battery photo 3.jpg
    153.6 KB · Views: 360
  • battery photo 2.jpg
    battery photo 2.jpg
    104.1 KB · Views: 379
  • battery photo 1.jpg
    battery photo 1.jpg
    99.8 KB · Views: 458
do you know what the connectors are called? I assume the one that looks like a funky VGA connector is the power and the round one is for charging?
 
Also is it $80 including shipping or $80 + $15 for shipping. I wasn't quite clear from the way it was worded.
 
It is 80$ plus 15$ for shipping so 95$ total. I'm sorry I do not know what the connectors are called
 
I received it a couple of days ago, but don't have a 48v charger yet. I had a 52v battery before. Waiting to get the charger to see how it works. I did connect it to my bike and do a quick ride with what power was left and it seemed to work great. Case is very sturdy and heavy, Need to figure out how to mount it. Has some strange (proprietary?) connectors. I snipped them and replaced with standard connectors; wiring appears very well done 12 gauge on output. No key for the lock provided and stuck in locked position with the tab out. I think it might be from this: https://toys.bike/cz/shop/elektricke-skutry-a-moto/e-scooter-mini-i-walk-105/
 
80$ per battery w/ 15$ shipping (which covers up to 6 batteries; after 15$ to ship another bundle of up to 6)
Batteries may be purchased individually as well.

Condition: Discharged and Re-Charged less than 20 times. May have some scratches on the metal case that do not affect performance.
Weight: 6lb with metal enclosure, 5lb without
Measurements: Lenght: 18.5” (15.5 without case) Width: 3.25” (2.7” without case) Height: 1.7” (1.5” without case)
Casing: Metal
Nominal Voltage: 46.8V Limited Charging Voltage: 54.6V/3A Resistance (23 ± 2 ℃): ≤ 250mΩ Charging time: 4-5 hours Cycle life: ~800 cycles Nominal Capacity: 10.5Ah Watt Hours: 491.4Wh Minimum wattage output: 500w
Amount of cells: 39
Cell manufacturer: Panasonic-Sanyo Cell Size: 18650
Cell model: Panasonic-Sanyo NCR18650GA 3500mAh
13s bms BMS: Installed (Low Voltage, Overcharge, Temperature, Current output and Short Circuit protection, with power equalization output) Use the operating temperature: Discharge: (0,-60) ℃; Charging: (0,-45) ℃; Connectors are identical to the Bionix and Stromer bikes, so it may fit them. DOES'T COME WITH A CHARGER*
Are these batteries still available or do you know where they can be purchased? Thanks. Bill 213-445-5613
 
Back
Top