What tire pumps do you use and why?

Unicorn

Active member
Local time
5:31 AM
Joined
Mar 15, 2025
Messages
154
Location
America
I use three tools to inflate tires: a floor pump, a hand pump, and a CO2 charger.

LEZYNE Minipumpe CNC Micro Floor: aluminum high volume w/guage hand pump equipped with ABS (Air Bleed System), Flip-Thread Chuck to fit Presta and Schrader valves, and Stainless Steel Foot-Peg - 90 lbs max
20250319_140500.jpg20250319_140433.jpg

LEZYNE aluminum Trigger Drive CO2: Compact design, pull trigger, durable, fits Presta and Schrader valves.
20250319_140615.jpg20250319_140629.jpg

TOPEAK JoeBlow Booster pump: Half air compressor – Half pump: Pump has integrated aluminum air chamber that stores an air charge of one liter, up to 160psi / 11 bar, to quickly fill your tire and ensure the proper installation on a tubeless rim, just like a shop compressor. When the selector is turned from “CHARGE” to “INFLATE” mode, air bypasses the chamber and flows directly into your tire like a standard pump.
20250319_140329.jpg20250319_140358.jpg

Unfortunately, I have used them all many times. All three will inflate either Presta or Schrader valves. The 1st two are easy to carry on the bike, well made, will handle more than the 70 lbs. pressure I require, and are inexpensive. The Topeak is well-made, repairable, high-pressure, and will fill my neighbor's fat tires.
 
That Giyo pump must be fun to use on a high-pressure tire. Wholly crap, that's tiny!

Stay safe.
Lol. Using it to go from 0 to 30 psi would be like a gym day. It works better than most though. Thankfully never needed to use it starting from 0 psi yet.
 
I f-ing bet it is, man. You've never needed to fix a flat while riding?!?!
the only time I did, the whole rim collapsed, so it wouldn't have mattered anyway. I've been pretty lucky in that department given the miles. I use rim strips. Most of my riding is on seasonal access highways, logging roads, and trails off of logging roads.
 
Links to Amazon may include affiliate code. If you click on an Amazon link and make a purchase, this forum may earn a small commission.
100% city streets are way more hazardous in all aspects of riding except proximity to others.
Yeah, they are, but I'm talking about debris puncturing a tire. I never get a flat on single-track or gravel.

Check this out at 2:14, you can hear me drive a 4" screw through the rear tire, and both sides of the tube into the rim liner and then pound it in 25 times. I couldn't pull it out with my fingers. That was bad.

()

Stay safe.
 
I have an assortment of floor and frame pumps, but the pump I use the most is the Makita DMP180ZX. It uses the same battery as my Makita power tools. The Chinese knock-offs are a third the price, so may get one as a backup.

https://a.co/d/8LHzSpv

On my eBike I carry a Knulksen cordless inflator. On my non eBikes, I have small frame pumps.
 
Links to Amazon may include affiliate code. If you click on an Amazon link and make a purchase, this forum may earn a small commission.
...I'd call my wife....ask her to bring the truck.....take my bike home and fix the tire...
I'm guessing from the reply that you don't ride far from your home. If I sat and waited for someone to save me from a flat tire, I'd wait far longer than it takes to fix a flat, ride home, and inconvenience someone. But I do agree that life is good.

Stay safe.
 
On my eBike I carry a Knulksen cordless inflator....
9.5" X 2" X 2" and 1.2 lbs? And it needs to be charged? The only advantage I can see is that it could be used as a battery bank. I try not to rely on batteries and electronics as much as possible. God knows I have too much already. But, if it works for you...

Stay safe.
 
My eBike’s riding weight, minus a filled up water bottle, but including an extra chain and a chain bike lock is 68 lbs - it can handle the extra weight ;) .
 
I have an old PlanetBike floor pump. Works OK, but the chuck is not staying attached to valves very well any more. It barely holds onto Presta at 70 psi. It needs replacing.

I also have a Lezyne micro pump that is carried next to a bottle cage on my gravel bike and a Park Tool micro pump that rides along with my Domane.

Then, I have a Snap-on CTINF9010 18 V inflator for the garage for Schrader valves and sports balls. (it's a prototype from before we released it)
 
My eBike’s riding weight, minus a filled up water bottle, but including an extra chain and a chain bike lock is 68 lbs - it can handle the extra weight ;) .
Yeah, but that's not what I'm talking about.

Stay safe.
 

Attachments

  • IMG_5269.jpeg
    IMG_5269.jpeg
    162.9 KB · Views: 3
Links to Amazon may include affiliate code. If you click on an Amazon link and make a purchase, this forum may earn a small commission.
I'm guessing from the reply that you don't ride far from your home. If I sat and waited for someone to save me from a flat tire, I'd wait far longer than it takes to fix a flat, ride home, and inconvenience someone. But I do agree that life is good.

Stay safe.
Yea....never more than 7 or 8 miles.....if ya get further than that.....it's too far from the frig where I keep the cold beer....and....heck....who wants that kinda emergency??? Life is good! LOL!
 
Back
Top