sw900 and 52v battery?

bluestrings

New member
Local time
7:36 PM
Joined
Jan 1, 2023
Messages
24
I wound up with a conversion kit which included a CSC 1500w rear hub wheel (26"), sw900 controller.
The motor is non geared and I have a hunch I won't be satisfied with the torque. In any case, the sw900 highest voltage setting is 48v.
Will this work with a 52v battery?
 
I have a SW900 on a 1500 watt cheap hub drive that goes from 48 volts up to 60 volts then 72 volts
on the SW900 display,but i run a 52volt 35ah battery in that one with no problems.
 
20230513_172442.jpg
 
I wound up with a conversion kit which included a CSC 1500w rear hub wheel (26"), sw900 controller.
The motor is non geared and I have a hunch I won't be satisfied with the torque. In any case, the sw900 highest voltage setting is 48v.
Will this work with a 52v battery?
do not get hung up on rated torque so much used to be torque freak till I found 50 nm is plenty of boost if your motor is direct drive you will have a quiet maintenance free unit, if you need more torque you can always upgrade to geared 062 bafang with adequate controller a bit noisy but strong
 
Back
Top