sw900 and 52v battery?

[bluestrings]

I wound up with a conversion kit which included a CSC 1500w rear hub wheel (26"), sw900 controller.
The motor is non geared and I have a hunch I won't be satisfied with the torque. In any case, the sw900 highest voltage setting is 48v.
Will this work with a 52v battery?

 

[HumanPerson]

I have a SW900 on a 1500 watt cheap hub drive that goes from 48 volts up to 60 volts then 72 volts
on the SW900 display,but i run a 52volt 35ah battery in that one with no problems.

 

[HumanPerson]

What controller do you have?

 

[bluestrings]

 

[HumanPerson]

ok mine says 36/72 so i think yours might be capped at 48?

 

[bluestrings]

I guess so.

 

[kmccune]

I wound up with a conversion kit which included a CSC 1500w rear hub wheel (26"), sw900 controller.
The motor is non geared and I have a hunch I won't be satisfied with the torque. In any case, the sw900 highest voltage setting is 48v.
Will this work with a 52v battery?

do not get hung up on rated torque so much used to be torque freak till I found 50 nm is plenty of boost if your motor is direct drive you will have a quiet maintenance free unit, if you need more torque you can always upgrade to geared 062 bafang with adequate controller a bit noisy but strong