Ride1Up controller codes

Ride1UP LMT’D gen2 - Error Code List

Error Code 21
Current Abnormality
The battery is not supplying the required voltage to power the
display and motor. Use the display to view the real-time voltage
being output from the battery. It can also be checked using a
multimeter. If the battery is old and has been charged /
discharged many times, it may need to be replaced.

Error Code 22
Throttle Abnormality
When you press and release the throttle, it should return to the
original position. Remove any obstructions. Check the throttle
and throttle cable for damage, such as a cut or frayed cable.

Error Code 23
Motor Phase Abnormality
Check the cable that connects the rear hub motor to the rest of
the system and make sure it is free from grit or contaminants and
is firmly connected. This error might appear if you don’t reconnect
the cable after removing the rear wheel (for example, after
changing a flat tire, or transporting your bike in the trunk of a car).
At least one of the motor wires has been damaged or is
disconnected.

Error Code 24
Motor Hall Signal Abnormality
Check the motor cable connection point by the chainstay, and
where the motor cable connects to the internal controller. The
wire might be disconnected or damaged, reconnect the motor
cable. Another possibility: Damage to the motor cable as it exits
the axle, perhaps if the wheel was dropped on the cable.

Error Code 25
Brake Abnormality
Disconnect electronic brake shut offs. Likely a magnet sensor
issue. This can happen often after a crash or when the bike is
dropped. See video on Ride1UP YouTube channel, or under
instructional videos on the support page to resolve.

Error Code 30
Communication Abnormality
A problem with the connection from the internal controller to the
display. The display is not receiving vital information.


Source: This is all straight out of the Ride1UP LMT’D gen2 manual, I've uploaded a copy of the manual here:
 
1 or 6 if i recall correctly.....unless yur tawkin aboot the stator magnets..
Okay I have no idea so if you can answer what is the difference and what is the number for each category I have a brand new bike I wrote it once I let my nephew borrow it and he screwed up the settings now it turns on but won't move
 
Ok what magnets are you looking for the count to mate?

There are magnets on the motor stator(magnet poles (2p) 20 ...
magnets for the PAS system and magnets for the brake shut off system on some kits.

What wattage is your bafang hub drive?
 
I have a bafang 1000 watt Fat Tire rear hub
My bike power is on when I hit the throttle it wants to move but it won't move so I wonder if that break magnet is in wrong setting I don't know like I explained my nephew mess with my bike and now it's messed up he changed the codes so I need to find a p codes for a bafang 1,000 watt Fat Tire rear hub
 
My bike power is on when I hit the throttle it wants to move but it won't move so I wonder if that break magnet is in wrong setting I don't know like I explained my nephew mess with my bike and now it's messed up he changed the codes so I need to find a p codes for a bafang 1,000 watt Fat Tire rear hub
So how do you get to the settings on your display and what display do you have on your ebike?

Is your ebike something you made or is it one of the brands you bought?

Do you use a programming cable or do you go through the settings on the display?
 
So how do you get to the settings on your display and what display do you have on your ebike?

Is your ebike something you made or is it one of the brands you bought?

Do you use a programming cable or do you go through the settings on the display?
I have a S enada .26-in Fat Tire electric bike with bafang 1000 watt wheel with 48 volt battery I am using an sw900 display please if anyone can help i would be much appreciated, I need to know what the settings are
 
I have a S enada .26-in Fat Tire electric bike with bafang 1000 watt wheel with 48 volt battery I am using an sw900 display please if anyone can help i would be much appreciated, I need to know what the settings are
 

Attachments

  • 20221228_095318.jpg
    20221228_095318.jpg
    138.4 KB · Views: 83
  • 20221230_135223.jpg
    20221230_135223.jpg
    103 KB · Views: 79
I have a fat tire 1000 watt rear hub with 48 volt battery
Ok what magnets are you looking for the count to mate?

There are magnets on the motor stator(magnet poles (2p) 20 ...
magnets for the PAS system and magnets for the brake shut off system on some kits.

What wattage is your bafang hub drive?
20221228_095318.jpg
20221230_135223.jpg
 
Back
Top