Replacing a 6 cable throttle with a 5 cable throttle on e-trike ?

paralectric

New member
Local time
4:45 AM
Joined
Mar 23, 2022
Messages
9
Hi. It's a Trike: 36v 350w Brushless motor.
IMG_8101.jpg


Question: Is replacing a 6 cable throttle(led bar) by a 5 cable throttle(led numbers display) even possible? If so, need to know the right order of the cables in switch.
throttle2.png

First time playing in wires, have no background in electronics, just plain observation. Could short the silver control box if wrong wires go, so i must be 100% sure.

I think 'Signal' cable is white on the 6 cable wires & blue on the 5 cable wire.
throttle333.png


Made a collage of many 6 cable throttles to compare general color assignations,often similar although not always standard.
5vs6.png


There are also many other unused wires sticking out the control box.
The 5 cable throttle should maybe plug that way for all i know...
loose2.png




Appreciate the help, thanks for reading
 

Attachments

  • IMG_8101.jpg
    IMG_8101.jpg
    178.4 KB · Views: 251
  • throttle.png
    throttle.png
    1 MB · Views: 318
  • throttle333.png
    throttle333.png
    792.8 KB · Views: 767
  • throttle333.png
    throttle333.png
    792.8 KB · Views: 213
  • throttle.png
    throttle.png
    1 MB · Views: 237
Trying to connect cables and confusion:

Yellow/blue cables from 'NEW' to yellow/brown cables on 'OLD'
makes key_switch turn scooter road light & led screen ON
but throttle will not make wheel turn. Also if the black
cables are connected the led screen is always on no matter key position.

Since the wheel was not moving i tried connecting black/red/green
to same color trio in loose wires with zero results.

Wheel never moved... hope i never burnt out something by cable connects
onlyKey.png
 
Back
Top