C chefdp1 New member Local time 2:49 AM Joined Dec 3, 2022 Messages 10 Dec 3, 2022 #1 Just got my Radrover . ready to do a few upgrades. Has anyone used the Datex 2 yet?
HumanPerson Oooohhhhmmmmm Staff member Local time 2:49 AM Joined Jan 21, 2021 Messages 4,453 Dec 3, 2022 #2 Hey you! Welcome to the forums mate
HumanPerson Oooohhhhmmmmm Staff member Local time 2:49 AM Joined Jan 21, 2021 Messages 4,453 Dec 3, 2022 #3 haven't used that yet...been eyeing it for a couple other builds though.
C chefdp1 New member Local time 2:49 AM Joined Dec 3, 2022 Messages 10 Dec 3, 2022 #4 HumanPerson said: haven't used that yet...been eyeing it for a couple other builds though. Click to expand...
HumanPerson said: haven't used that yet...been eyeing it for a couple other builds though. Click to expand...
C chefdp1 New member Local time 2:49 AM Joined Dec 3, 2022 Messages 10 Dec 3, 2022 #5 I just received one in the mail. Going to soldering xt60s and xt90s to my wires. just not sure which wire on the controller to tap into yet .
I just received one in the mail. Going to soldering xt60s and xt90s to my wires. just not sure which wire on the controller to tap into yet .
HumanPerson Oooohhhhmmmmm Staff member Local time 2:49 AM Joined Jan 21, 2021 Messages 4,453 Dec 3, 2022 #6 Shouldnt it be battery, battery then to the controller....the same connection the original, single battery used ?
Shouldnt it be battery, battery then to the controller....the same connection the original, single battery used ?
C chefdp1 New member Local time 2:49 AM Joined Dec 3, 2022 Messages 10 Dec 3, 2022 #7 HumanPerson said: Shouldnt it be battery, battery then to the controller....the same connection the original, single battery used ? Click to expand... yes your right of course...
HumanPerson said: Shouldnt it be battery, battery then to the controller....the same connection the original, single battery used ? Click to expand... yes your right of course...
Hoggdoc Moderator Staff member Local time 11:49 PM Joined Mar 6, 2021 Messages 1,033 Location SW Washington State, USA Dec 3, 2022 #8 chefdp1 said: Just got my Radrover . ready to do a few upgrades. Has anyone used the Datex 2 yet? Click to expand... Area 13 has their own parallel battery management box. From what I have read about it sounds pretty good.
chefdp1 said: Just got my Radrover . ready to do a few upgrades. Has anyone used the Datex 2 yet? Click to expand... Area 13 has their own parallel battery management box. From what I have read about it sounds pretty good.
C chefdp1 New member Local time 2:49 AM Joined Dec 3, 2022 Messages 10 Dec 4, 2022 #9 with the datex device you can use batteries different voltages.
Hoggdoc Moderator Staff member Local time 11:49 PM Joined Mar 6, 2021 Messages 1,033 Location SW Washington State, USA Dec 4, 2022 #10 chefdp1 said: with the datex device you can use batteries different voltages. Click to expand... Wonder how that works, do the discharge the high voltage battery first then actually connect them parallel?
chefdp1 said: with the datex device you can use batteries different voltages. Click to expand... Wonder how that works, do the discharge the high voltage battery first then actually connect them parallel?
C chefdp1 New member Local time 2:49 AM Joined Dec 3, 2022 Messages 10 Dec 4, 2022 #11 Hoggdoc said: Wonder how that works, do the discharge the high voltage battery first then a Click to expand...
Hoggdoc said: Wonder how that works, do the discharge the high voltage battery first then a Click to expand...
C chefdp1 New member Local time 2:49 AM Joined Dec 3, 2022 Messages 10 Dec 4, 2022 #12 check put this post. he explains it really well
H hugh Active member Local time 1:49 AM Joined May 20, 2021 Messages 163 Dec 5, 2022 #13 I have the area 13 box, so far it works great. All I needed to add to it was a couple XT60 to XT 90 adapters
I have the area 13 box, so far it works great. All I needed to add to it was a couple XT60 to XT 90 adapters