Question for Lectric 3.0 owners

Smaug

Moderator
Staff member
Local time
12:37 PM
Joined
Jun 9, 2022
Messages
1,944
Location
SE Wisconsin
I'm looking at a used one of these, with a bent brake lever. Hydraulic.

Is it possible to replace just the brake lever, or would the whole brake system on that side need replacing?
 
Hey Smaug, according to Lectric they use Nutt hydraulic brakes. The levers are definitely around. Does the one you need have red cut off with 2 pins? There are a few different types on Ebay. You can tell which ones are hydraulic because they will show the little filler plug.
Screenshot_20250201-161759_Chrome.jpg
 
Just looked at my bike and the lever appears to be riveted to the master cylinder/mount/housing. @Annieolnie 's post would be the solution.
I have straightened cast aluminum motorcycle levers without breaking them using two short 2x4's and a vise. If it bent once without breaking it will bend twice. Might be worth a try if you get the bike bought.
 
Back
Top