Pas Help for one piece old school crank

Merlin

New member
Joined
Aug 4, 2022
Messages
2
Points
1
I am about to do it on my build (antique cruiser frame), and am just going to slightly drill out the magnet ring to make it fit. Once adjusted I'll hot-glue it in place and 3d print a reinforcement bracket of some sort. If that fail's I'll just print a new ring to fit and salvage the magnets for it.
 

Attachments

  • new PAS sensor from ebike direct.jpg
    new PAS sensor from ebike direct.jpg
    59.8 KB · Views: 2
Top Bottom