No turn signal indicator on display?

[Tdt3607]

One week in, really enjoying the Emma 3.0. I noticed in the manual the turn signal indicators on the display. Does anyone know if they should be showing up on the display when engaged? Mine do not. Hopefully it simply isn’t supported in the firmware and not a problem with my unit.
Thanks for any feedback.

 

[bernadettezhana]

I asked the same question. It doesn't show up on the meter. The tech said the meter will be overloaded with too much functions. So that's normal

One week in, really enjoying the Emma 3.0. I noticed in the manual the turn signal indicators on the display. Does anyone know if they should be showing up on the display when engaged? Mine do not. Hopefully it simply isn’t supported in the firmware and not a problem with my unit.
Thanks for any feedback.

 

[Annieolnie]

I looked into this a little bit. The display is a Sciwil, SW-M808X. It has good documentation and supporting manuals are easily looked up. There is no reason the display cannot show turn signal indication, but the manual states that it is dependent on the controller. Some Roll Road Emma's have been shipped with different controllers. I don't know if they are good or bad, just different. If it were me, I would look at my controller, right down the specs then talk to Roll Road and ask them what my controller is suppose to be. Don't tell them, let them tell you and see if it matches what you have. Honestly, controllers are the most overlooked aspect of people buying ebikes, but one of the most important.

One week in, really enjoying the Emma 3.0. I noticed in the manual the turn signal indicators on the display. Does anyone know if they should be showing up on the display when engaged? Mine do not. Hopefully it simply isn’t supported in the firmware and not a problem with my unit.
Thanks for any feedback.