Mike1125biking
New member
- Joined
- Apr 8, 2022
- Messages
- 1
- Points
- 1
How do you tighten the lcd display?
New juiced Ripcurrent
- Thread starter Mike1125biking
- Start date
- Joined
- Jun 15, 2018
- Messages
- 500
- Points
- 43
- Age
- 37
You can use a 1.5mm hex tool to tighten LCD display on the Juiced Ripcurrent, might also need a 3mm to adjust the throttle mount.
Hex tool set:
Folding hex tool set:
-------------------------
Can the display be tilted at a different angle?
Yes, you can tilt the LCD screen downwards. Use a 1.5 mm hex tool to loosen or tighten the LCD display mount. When adjusting the screen, make sure it does not interfere with the throttle as it could accidentally engage. If you need to adjust the throttle mount, you can use a 3 mm hex tool.
Tools Needed:
- 1.5mm Hex tool for the LCD display mounts
- 3mm Hex tool to adjust the throttle mount
Source: https://support.juicedbikes.com/en_us/can-the-display-be-tilted-at-a-different-angle-By4pnYDMt
Hex tool set:
Folding hex tool set:
-------------------------
Can the display be tilted at a different angle?
Yes, you can tilt the LCD screen downwards. Use a 1.5 mm hex tool to loosen or tighten the LCD display mount. When adjusting the screen, make sure it does not interfere with the throttle as it could accidentally engage. If you need to adjust the throttle mount, you can use a 3 mm hex tool.
Tools Needed:
- 1.5mm Hex tool for the LCD display mounts
- 3mm Hex tool to adjust the throttle mount
Source: https://support.juicedbikes.com/en_us/can-the-display-be-tilted-at-a-different-angle-By4pnYDMt
