New ebike battery has different connectors to my existing one?

Poppycute7

New member
Local time
7:15 AM
Joined
Apr 25, 2023
Messages
1
Location
Spain
Hi The new battery has different connectors to my existing one.. Is it easy to change the connector?
 
Links to Amazon may include affiliate code. If you click on an Amazon link and make a purchase, this forum may earn a small commission.
I had the same issue when I was building mine. I used one of these -

 
Links to Amazon may include affiliate code. If you click on an Amazon link and make a purchase, this forum may earn a small commission.
Hi The new battery has different connectors to my existing one.. Is it easy to change the connector?
Do you know what connectors you are dealing with on both sides of the connection? Next search will find which one is most available, I would pick that one. Then send us some pictures so we can advise on difficulty of the install.
 
Hi and welcome to the forum :)

As long as you can solder it's pretty easy.

Also there are some nice butt connectors that already have solder within them.
You'd need to have a heat gun for these.

I would never use solder to connect battery wires on an e-bike. A good crimp is far better and won't fail in unfortunate ways in an overcurrent.
 
Links to Amazon may include affiliate code. If you click on an Amazon link and make a purchase, this forum may earn a small commission.
Back
Top