New Battery - Voltbike Yukon

Jimbritt

New member
Joined
Jan 10, 2022
Messages
6
Points
1
Hi everyone, I could use some good advice,does anyone know where I could get a new battery for my volt Yukon 750,48 volt 17.5 amp for a decent price on Amazon and also will the battery fit right into where my existing battery is or do I have to connect right to the controller, I could use the help as I am not hip to this stuff, Thankyou!!
 

Nelson37

Active member
Joined
Mar 15, 2022
Messages
461
Points
28
Well, you will need a battery the correct size to fit into your battery hole. Measure very, very carefully.

The battery will have some sort of red and black terminals or wires, these will connect "directly" to the controller. There may, or may not, be some additional wires and/or connectors in-between, which are not necessarily needed.

There are various standard types of connectors, Andersons, Deans, several others. There are also lots and lots of individual and unique ones for various types of integrated batteries.

To find an exact replacement will limit your options, most likely.

If you can fit the size and shape onto your bike, somewhere, it is only a matter of connecting two wires, or splicing on four connectors.

I think you have a vertical seatpost-mount unit meant to remove easily, just do a search on amazon for yukon battery.
 

Jimbritt

New member
Joined
Jan 10, 2022
Messages
6
Points
1
Well, you will need a battery the correct size to fit into your battery hole. Measure very, very carefully.

The battery will have some sort of red and black terminals or wires, these will connect "directly" to the controller. There may, or may not, be some additional wires and/or connectors in-between, which are not necessarily needed.

There are various standard types of connectors, Andersons, Deans, several others. There are also lots and lots of individual and unique ones for various types of integrated batteries.

To find an exact replacement will limit your options, most likely.

If you can fit the size and shape onto your bike, somewhere, it is only a matter of connecting two wires, or splicing on four connectors.

I think you have a vertical seatpost-mount unit meant to remove easily, just do a search on amazon for yukon battery.
Thank you for the info, You were very helpful, Thanks Again!!
 
Top Bottom