Need a solution for a power bank mount - Super73

[YRDDFy74]

So I've got this jump starter battery pack which I'm going to try and hack to work with LED turn signals by splitting the micro USB cable for connection points. Got the turn signals, handlebar switches, relay, light holders, extra cable etc. Should be a doddle...I hope

I need some way of having it on the bike whilst being easily removable for charging.

Position wise I'm thinking the two screw points under the seat seems like a good spot as it keeps it out of the rain.
Some kind of harddrive disc tray with round rubber clamps which nudge the device up and hold it firmly inside would be perfect. Has anyone done anything remotely similar and/or has any solution which I can easily buy? My gut says I'm going to have to go full custom here.

This is the the power bank -

Audew 2000A Peak 20000mAh Car Jump Starter for All Gas Engines or Up To 8.5L Diesel Engines with LCD Power Display

Your friend shared a website for you! Check it now.

m.audew.com

 

[mtbbiker]

What ebike are you trying to put this on? Most ebikes have 1 extra port on the motor that can supply power.

 

[RickBullottaPA]

I'd probably 3D print an adapter than went between the power bank and my bike frame and accomodated their respective shape(s), then put some adhesive rubber pads, and then retain it with a couple velcro straps.

 

[YRDDFy74]

I own Super73.

 

[matt4x4]

A quick removable custom battery, is hard to do. Can use bottle cage bosses if your Super73 has any, but nothing off the shelf, you need a 3d printer or some fabrication skills. Can just throw the battery into a basket or bag then theres vibrations and bouncing, velcro would make it easily removable.

If you look at the major independant online DIY ebike stores, like some have mentioned Luna Cycle in other threads, sometimes they have a bracket, I know the one store in Canada has one for Ezee kit. But your talking some hackenstein power bank chop shop battery so nothing off the shelf, you need to think out side the box, buy some velcro, make a mount or whatever.

 

[powrtrip]

I make 12 volt/USB distribution boxes that tap into the main battery system if you want to just use auto or motorcycle 12 volt stuff...