Motor controller wiring confusion plz help! 48v?

BoblegogamerYT

New member
Local time
11:52 PM
Joined
Oct 30, 2021
Messages
3
I got a motor controller with a e bike that I got it has no stickers or labels I have identified the hall wires and phase wires but have no clue what the other wires do plz help
 

Attachments

  • PXL_20211030_152938818.MP.jpg
    PXL_20211030_152938818.MP.jpg
    114.8 KB · Views: 170
  • PXL_20211030_152938818.MP.jpg
    PXL_20211030_152938818.MP.jpg
    114.8 KB · Views: 168
  • PXL_20211030_152935860.MP.jpg
    PXL_20211030_152935860.MP.jpg
    115.6 KB · Views: 158
  • PXL_20211030_152932397.jpg
    PXL_20211030_152932397.jpg
    130.8 KB · Views: 152
  • PXL_20211030_152930231.jpg
    PXL_20211030_152930231.jpg
    110.9 KB · Views: 147
  • PXL_20211030_152924203.jpg
    PXL_20211030_152924203.jpg
    192.6 KB · Views: 160
  • PXL_20211030_152921731.jpg
    PXL_20211030_152921731.jpg
    164.5 KB · Views: 145
  • PXL_20211030_152913435.jpg
    PXL_20211030_152913435.jpg
    149.6 KB · Views: 154
Update I teared down the controller and got some pics I believe it's a 48 volt controller because of the capacitor but don,t know what the rest do
 

Attachments

  • PXL_20211030_181941441.jpg
    PXL_20211030_181941441.jpg
    211.8 KB · Views: 156
  • PXL_20211030_182556038.MP.jpg
    PXL_20211030_182556038.MP.jpg
    121.2 KB · Views: 159
  • PXL_20211030_182309545.jpg
    PXL_20211030_182309545.jpg
    142.6 KB · Views: 151
  • PXL_20211030_182246364.jpg
    PXL_20211030_182246364.jpg
    162.9 KB · Views: 145
  • PXL_20211030_182226789.jpg
    PXL_20211030_182226789.jpg
    158.5 KB · Views: 150
  • PXL_20211030_182226789.jpg
    PXL_20211030_182226789.jpg
    158.5 KB · Views: 145
  • PXL_20211030_182146600.jpg
    PXL_20211030_182146600.jpg
    119.8 KB · Views: 146
  • PXL_20211030_182226789.jpg
    PXL_20211030_182226789.jpg
    158.5 KB · Views: 150
  • PXL_20211030_182138097.jpg
    PXL_20211030_182138097.jpg
    158.8 KB · Views: 153
  • PXL_20211030_182117980.jpg
    PXL_20211030_182117980.jpg
    194.3 KB · Views: 152
My more photos s
 

Attachments

  • PXL_20211030_182013319.jpg
    PXL_20211030_182013319.jpg
    116.1 KB · Views: 148
  • PXL_20211030_181950264.jpg
    PXL_20211030_181950264.jpg
    233.6 KB · Views: 152
  • PXL_20211030_181941441.jpg
    PXL_20211030_181941441.jpg
    211.8 KB · Views: 148
  • PXL_20211030_182138097.jpg
    PXL_20211030_182138097.jpg
    158.8 KB · Views: 148
I suggest you buy a new controller of known quality and specs. While you're at it get a compatible display unit from the same seller. This is the only way unless you have a degree in electronic engineering you will not be able to make this work.

The good news is both of these items are relatively inexpensive.
 
red plug 2 wire = alarm power
red plug 3 wire = alarm sense
thick blue/green/yellow = motor power
white plug with 2x red 1x black = power (thick red/black) and ignition (thin red)
2x white wires that plug into each other = learn wire
green wire with female plug = instrument power
black/white wires on 2 pin plug = brake (prob)


I assume that there are 2 or 3 3 wire plugs with thin wire these will be throttle and pas and 3 speed switch.
 
Back
Top