Hall motor abnormality

kstdenis

New member
Local time
2:03 AM
Joined
Jul 24, 2021
Messages
2
Trying to get my Schwinn Meridian up and running again. I had a Dillenger kit on it that worked great until the electronics got fried. I've contacted them but haven't had much luck getting a response. I bought a Chinese kit without the motor and battery since I already had three wheels with motors and thought I could match up the electronics with the motors. I'm not having much luck getting the wheels rolling so to speak. I keep getting an error message, the same message on three separate motors. Unfortunately, the Chinese kit that I purchased, although apparently of rather good quality, has no directions or labels (how shocking!) other than a nice guide to the LCD functions. I'm wondering what my next step should be as all three motors were working in the past yet I get the same error code when I hook each one up. Any suggestions from the experts here would be appreciated! Thanks!
Kevin
 

Attachments

  • IMG_20210724_141026585.jpg
    IMG_20210724_141026585.jpg
    146.5 KB · Views: 158
  • IMG_20210724_141059065.jpg
    IMG_20210724_141059065.jpg
    130.5 KB · Views: 155
  • IMG_20210724_141107317.jpg
    IMG_20210724_141107317.jpg
    148.5 KB · Views: 148
  • IMG_20210724_141129184.jpg
    IMG_20210724_141129184.jpg
    163.6 KB · Views: 157
  • IMG_20210724_143007013.jpg
    IMG_20210724_143007013.jpg
    133.9 KB · Views: 157
Back
Top