Fiido M1Pro Motor Cable

[Scratch]

Hi Fellow Easy Riders.
My Fiido M1Pro 500W has been off the road for weeks now as I cant seem to locate a new Hub Motor Cable in the UK, I've managed to remove the old damaged cable, which wasn't easy. Its a 9wire cable but has a 6pin plug, plus 3 external wires at the end where the bike breaks in half.
At the motor end it has 9 loose wires which will have to be soldered on to the Motor and is approximately 110cm long.
Any ideas please.

 

[Annieolnie]

From what I can find out, your motor is made by Jiaxi Motor Co. They have a website. You could talk to them and see if they can send you a new one. Fiido has your whole motor for $247.00, so if you end up completely desperate, there is that. Fiido also has a good parts dept. Have you asked them if they can order one for you?

 

[Scratch]

Hi, thanks for your help, I have ordered a cable from Ebay that's very similar, if I cut the plug off one end and solder the wires onto the hub I think i can do it. The hardest part is threading the cable through the spindle. They don't make it easy.

 

[Annieolnie]

Maybe you can duct tape a piece of string to the wires and then thread it through that way. I've done this on the firewall of cars. Good luck.