Engwe Logan Hydraulic Brakes - Hose Replacement

Jimbobolob

New member
Local time
6:21 AM
Joined
May 31, 2023
Messages
15
Location
UK
Hi, first time with hydraulics.

I was about to swap the pipes left-to-right, but noticed the front brake pipe has been kinked at the factory.

Levers and callipers are branded ‘Logan’ and the callipers have ‘2207’ on them. Levers are embossed “mineral oil”.

How can I determine the correct pipe and fittings to buy? I can’t find anything about these brakes online - although they do work extremely well!

Many thanks indeed. Btw I have a bleed kit.
 

Hoggdoc

Moderator
Staff member
Local time
10:21 PM
Joined
Mar 6, 2021
Messages
840
Location
SW Washington State, USA
Hi, first time with hydraulics.

I was about to swap the pipes left-to-right, but noticed the front brake pipe has been kinked at the factory.

Levers and callipers are branded ‘Logan’ and the callipers have ‘2207’ on them. Levers are embossed “mineral oil”.

How can I determine the correct pipe and fittings to buy? I can’t find anything about these brakes online - although they do work extremely well!

Many thanks indeed. Btw I have a bleed kit.
I'm your local bike shop can help you determine the correct "pipe" to use. Other than that use a caliper and measure the OD (outside diameter" and ID Inside diameter of the current "pipe") and do some shopping on the web.
 

Jimbobolob

New member
Local time
6:21 AM
Joined
May 31, 2023
Messages
15
Location
UK
Thanks, so the hoses are 5mm diameter. But the insert arrangement is quite different to eg shimano, it has an o-ring but its much smaller than Tektro, just 5.5mm OD:


IMG_7356.jpeg
 
Top