Download Bafang configuration software

I have several bafang bbs02 mid drives that i would like to program. I tried downloading the software from Luna’s website, but I can’t read it, is there a software download for win 11?
 
I have several bafang bbs02 mid drives that i would like to program. I tried downloading the software from Luna’s website, but I can’t read it, is there a software download for win 11?
Both the Luna software (Penofs rewrite) and Penofs own version work under windows 10 and 11, but note that Penofs own version has some preset limits in it, for safety, if you know what you are doing the Luna one is great.
The download version available on this site requires that you login then download
 

Attachments

  • Screenshot 2021-11-22 154622.png
    Screenshot 2021-11-22 154622.png
    131.1 KB · Views: 2,251
  • Screenshot 2021-11-22 155043.png
    Screenshot 2021-11-22 155043.png
    127.1 KB · Views: 885
Thanks for the advice, I finally got the software loaded and took my first shot at programming, it went well. Now I want to do some advance programming, so can i have assist levels at predetermined % and the throttle in the same PAS level be higher? For example if I had PAS 5 at 65% could I have throttle in PAS 5 at 80% like having a boost without changing gears or PAS levels
 
Firstly you should set up your BASIC settings pas 1-9 incrementally say from 10-100% CURRENT and SPEED LIMITS.
You can then set your throttle at any of the 1-9 pas settings you set up on the BASIC tab, so if *)% is on pas 8 then set throttle to pas 8.
I will attach my maps so you can get some ideas, but BEWARE, there are differences to BBS01 BBS02 BBS02B and BBS1000HD motor controllers, they all have different MOSFETS in them and can be blown/overloaded, so be careful what you change, I run a BBS02B 350W with 48V x 10.5AH battery and a BBS02B 750w with 48v x 17.5AH battery, you will notice on my 750W model (Program attached) that whilst it has 25AMP controller I have limits set way below for safety. (on my other 350w motor with 10.5ah battery my current limits are a step down again.
As a matter of interest, I have no set limits in any BASIC pas, and my THROTTLE at pas 5 (50% current ) is ample to get me up most hills in my neck of the woods :)
IF you are unsure what you are doing I suggest you download PENOFS own programmer which has some SET LIMITS you cant override
 

Attachments

  • JJ-G-750-V5.zip
    336 bytes · Views: 2,183
Back
Top