Sorry, I could not find a way to post this in the Aventon section. I took the rear wheel off my Aventon Aventure 2 to fix a flat and this washer fell off and I'm not sure how to put it back on (which direction or side). It has a lip on one end. I've searched the web but found nothing. Thanks.
- Local time
- 3:59 AM
- Joined
- Jan 21, 2021
- Messages
- 4,100
on first with the lip out...
must be oriented in correct alignment with slot axle slides into.
Hope this helps
must be oriented in correct alignment with slot axle slides into.
Hope this helps
- Local time
- 3:59 AM
- Joined
- Jan 21, 2021
- Messages
- 4,100
I started this video where you can see how it goes on...around 1:05 again at 1:16
Would this be correct? Sorry, I brought just the tire into work to fix the flat and the washer just fell on the floor. I didn't notice it's position on the wheel. Maybe that lip might be there to protect the wire?
This video gave me the courage to try and repair the flat myself. I should have kept a better eye on all those washers.
- Local time
- 3:59 AM
- Joined
- Jan 21, 2021
- Messages
- 4,100
- Local time
- 3:59 AM
- Joined
- Jan 21, 2021
- Messages
- 4,100
