Anti theft alarm wiring

bicyclebodega

New member
Joined
Nov 18, 2021
Messages
1
Points
1
Hi team,

I have an ebike anti theft alarm. I use them fine when the controller has an anti theft plug. I now want to wire them into other ebikes that don't have the anti theft plugs.
There is very limited info on the net and I cant always get full access to the controller to check the board lettering.

H02a877dd33e944c690e37b584bc7ea88V.jpg



Would love some help on how to get this done.


Obviously black and red are battery connections.
Orange goes to one of the motor phase wires.
Just dont really know how to wire the rest.

Any help is appreciated.
 

Hoggdoc

Active member
Joined
Mar 5, 2021
Messages
461
Points
43
Location
Longview, WA.
Website
activityphoto.com
Hi team,

I have an ebike anti theft alarm. I use them fine when the controller has an anti theft plug. I now want to wire them into other ebikes that don't have the anti theft plugs.
There is very limited info on the net and I cant always get full access to the controller to check the board lettering.

View attachment 2643


Would love some help on how to get this done.


Obviously black and red are battery connections.
Orange goes to one of the motor phase wires.
Just dont really know how to wire the rest.

Any help is appreciated.
I really don't have any idea, but you should reach out to AZguy on https://electricbike.com/forum/
He seems to be an electronics wiz with a lot of e-bike experience.

Hope that helps with you question.
 

spinnanz

New member
Joined
Dec 10, 2021
Messages
14
Points
3
just use the 2 pin red and black to power the alarm.

All the other 3 pin plug does is allow the alarm to sense when the controller is powered up and stop the alarm being activated then the controller is powered up.
 
Top Bottom