GuyPirelli
New member
- Local time
- 11:08 PM
- Joined
- Jan 12, 2023
- Messages
- 1
Hi,
After taking my battery apart, I am putting it back together in the original order, but I'm running into an issue with the wiring. When I connect one of the wires between the cell groups on the pack, I get a short. The other wires that connect the cell groups are connected in parallel, while this one is connected in series (or +end to -end) I think. I have an eel style reention battery so the cell orientation is a little different. Should I install the BMS ground wire first or some other wires in a particular order?
The wire I'm trying to connect is at the two soldered points by the numbers "5" on the left side of the pack.
After taking my battery apart, I am putting it back together in the original order, but I'm running into an issue with the wiring. When I connect one of the wires between the cell groups on the pack, I get a short. The other wires that connect the cell groups are connected in parallel, while this one is connected in series (or +end to -end) I think. I have an eel style reention battery so the cell orientation is a little different. Should I install the BMS ground wire first or some other wires in a particular order?
The wire I'm trying to connect is at the two soldered points by the numbers "5" on the left side of the pack.
