bafang

Hi Anyone know what the motor windings resistance readings should be for the BBS01 About to replace a blown controller and just covering all bases. Thanks

I'm new to Ebikes so go easy on me! lol I recently purchased a Mid Drive bike with a Bafang M600. The display that was supposed to come on the bike was a 3-1/2" color but came with a 1" black and white, which I'm not happy about. Pics attached. The manufacturer has offered me a $50 discount to...

I want to be able to use 100% power with the Thumb Throttle regardless of what Pedal Assist Level I am in. I am using 9 PAS levels with the Current starting at 10% & incrementally increasing to 100% by Level 9. The maximum speed for each level is set at 100%. The Throttle Mode is set to...

Hello. I bought an Bafang BBSHD 48v on second hand. I installed it with an 48v battery. When battery is fully charged display shows 67% battery. And when battery gets close to zero it shows 46-47v on display. Shouldn't it be close to 41-42v when a 48v battery is low? Why isn't it showing 100%...

I have converted a mountain bike (my first conversion) which has all gone smoothly and works well. I could not however fit the brake hall sensors as the Shimano hydraulic brakes did not have a flat surface suitable for attaching the sensors, everything was shaped, rounded or curved and there...

Hello I have a Romet Vintage mens city bike which I would like to turn into a e-bike using Bafang BBS02B 750W mid drive motor but the chainwheel on my bike is 38T and the smallest chainwheel that psw power have to offer is 44T and they responded me that I need to choose 38T. So the question is...

I have just bought an ex demo model trike, I cannot remember the make, it has a LSDZS controller fitted which no longer works, The Product No is LSW686-27-1M X21100167 Ex factory date 10 2021. The spec is Rated Voltage 48V Max Current 25A Rated Current 12A Low voltage protection 42V Throttle...

Hello, I have 500 watt rear hub bafang motor and 48 volt battery. My speed limit is 40km/h. My friend have 250 watt rear hub bafang motor and 48 volt battery. My friend's speed limit is 40km/h. İt is not fair. How can I upgrade or unlock or hack or etc. speed limit? Is the only way...

I own a 2014 Sondors ebike. Custom 36-volt battery. BaFang 350 watt hub motor. After market controller (KT36 36V/48V 20A). When I bought a new 36 volt battery last year. It worked for about a month before I noticed a loud scratchy squawking sound, during takeoffs. I checked, and the controller...

First major ride.. M510 (small 10.4Ah battery) Derestricted (37.5mph/60Kph).. PAS @ level 3 (played around with each setting).. Front light on (drawing approx. 9v) LOVED IT. Still need to get used to it all - spent 2-3 weeks riding the bike before the battery arrived so my legs could build up a...

HI I'm new here , my is name Ben from the Netherlands and so I'm not sure how everything works but i have a question I have a new 2023 bike with a Bafang M200 mid motor, but not entirely happy with it, it runs not smooth enough is the best way to describe it So i like to see how its programmed...

Hi guys, real newbie here. I want to add a Bafang 1000 watt motor to my 2008 Scott Gambler and looking at the specs it says it has a 83mm bottom bracket, the bafangs are 68, 100 or 120mm. Any idea on the size I should order?

Has anyone managed to use Magura brake levers with the red two pin connectors with Bafang motors that have the yellow three pin connectors. Does anybody know if there is an adaptor that will make these levers work with out doing surgery? https://www.ebay.com/itm/204343784491 Thanks, much...

I recently had to do a near total replacement of parts on my Himo Z20. Basically, something about even the wire harness which splits out to the handle bar controls was screwy and didn't work tlwith the new motor. I have, up to this point,been using a rear turn signal and light that is...

Is there plug compatibility between BBS02 and M series Bafang systems?

I've been reading alot about greasing the gears but have seen nothing on dealing with the bearings. I have seen replacement gears with the bearings included (probably pressed on). They appear to be sealed or dust covered so I'm asking first has anyone tried to grease them? Or, pulled off the...

I have a newly installed Bafang front hub kit with DPC-18 display. I need to change PAS settings and it appears that I need to set up to modify the programming. Based on looking at the information that I have found I am looking for information necessary to set up to get started with doing...

Have a Scorpion FS 26 with a Bafang Ultra.Would like the controller to go from 1/2-4 or 5 rather than the stock 1-9 assist.Looking to have less assist than the #1 setting gives me.Thanks!

I currently have a luna x2 w the Dpc240 display. I broke it and then it got wet. So I want to upgrade since I'm replacing it anyway.My question is the dpc240 has the can cable that plugs directly into back of the display. All the ones I look up online have a cable that comes out the back that...

Hello everyone, I bought 4 months ago a BAFANG M620 motorized bike equipped with two 48V batteries on Alibaba. You can see the details of the bike here...